Saving on electric heating costs: smart tips for a lower energy bill in 2026

What if switching to electric heating becomes not your biggest expense, but actually your smartest saving of 2026? Many households are still hesitant to turn off the gas tap further for fear of an exploding electricity bill. Yet, modern electric heating with an app nowadays gives you complete control over every cent you spend. With the current electricity price averaging €0.259 per kWh, it is essential not to simply turn on a heater, but to heat specifically the areas where you actually spend time.

We understand that uncertainty regarding efficiency and the many smart home functions cause doubts. That is why we show you how you can save hundreds of euros per year on your total energy bill using the right strategies and Norwegian precision technology. In this guide, you will receive a concrete plan to lower your heating costs, discover which heaters are the most efficient, and learn how advanced app control helps you permanently prevent energy waste.

Saving on electric heating costs: why switching in 2026 pays off

By 2026, the Dutch energy market will have fundamentally changed. The time when natural gas was the self-evident basis for every household is definitively behind us. With an average gas price of €1.398 per m³ and a substantial energy tax of €0.72679 per m³, more and more households are seeking electrical freedom. This is not just about the long-term vision of a gas-free Netherlands in 2050. It has become a practical choice to keep monthly costs immediately manageable. Modern electric heating with an app offers the solution here by combining precision and control in a way that was simply impossible with traditional systems.

The shift from gas to electric heating

The transition to a sustainable household has entered a new phase. Although the government has scrapped the mandatory requirement for hybrid heat pumps, consumers are increasingly opting for electric alternatives due to low installation costs and a lack of maintenance. While a central heating boiler requires annual inspection and parts wear out over time, modern convectors are virtually maintenance-free. By making smart use of supplementary electric heating, you can significantly lower the central thermostat in the rest of the home. This relieves the load on the main heater and ensures that you only pay for the heat in the room you are currently in. This zoning principle is the key to a lower energy bill in the current market.

Direct savings through technological efficiency

The technology behind electric heating has taken off enormously in recent years. Old, energy-guzzling radiant heaters have given way to advanced convectors that distribute the airflow in a natural and even manner. A fundamental advantage is the technical efficiency of electric heating; virtually 100% of the electricity consumed is converted directly into usable heat in the room. No energy is lost through long pipes or exhaust ducts to the outside.

The fast response time of these systems plays a crucial role in your daily consumption. Instead of keeping an entire house at temperature for hours, an electric heater with an app to your specific heating needs within minutes. You only switch on the heat when necessary. With an average electricity price of €0.259 per kWh in July 2026, this targeted approach is the most effective method to minimize your heating costs without compromising on living comfort. Modern convectors thus form the backbone of a smart and future-proof energy plan.

Smart strategies for lower consumption with electric heating

Efficiency is all about control. Instead of passively waiting for the energy bill, you can drastically reduce your consumption with an active strategy. The most effective method is implementing zonal heating. This simply means stopping the heating of the entire house when you are in just one room. An electric heater with an app each room as an independent zone beha. This allows you to create a heating plan that seamlessly aligns with your lifestyle.

Zonal heating: heat only the rooms you use

Dividing your home into zones starts with your daily routine. A home office needs to be comfortable during the day, while the living room only requires heat in the evening. By controlling these spaces separately, you prevent wasting energy on empty rooms. Follow this simple step-by-step plan:

• Map your movements: which spaces do you use at which times?
• Set a target for each zone: 21 degrees in the seating area is comfortable, but 18 degrees is often more than sufficient for an active workday in your office.
• Keep doors closed between different zones to minimize heat loss to cold corridors.

This prevents valuable energy from escaping to places where it is not needed. With the right settings, save energy with a smart thermostat as the system automatically switches off when you leave the room or go to sleep.

The power of insulation in electric auxiliary heating

Even the most advanced convector works harder than necessary if basic insulation is lacking. Small interventions here have an immediate and significant impact on your comfort and electricity bill. For example, install radiator foil behind your wall convector to prevent heat from penetrating the wall. Draft strips on windows and doors are essential to block cold outside air that causes your thermostat to switch on unnecessarily.

Good insulation significantly shortens the so-called 'on-time' of your heating. In a well-insulated room, the convector only needs to emit short bursts of heat to maintain a constant temperature. Pay particular attention when placing a convector under a window; without double glazing, you lose the most energy here. Combine these physical measures with the precision of a smart convector for optimal results.

Finally, don't forget the night-time temperature reduction. It is a persistent myth that reheating a room costs more energy than keeping it constantly warm. Lower the temperature at night to around 15 or 16 degrees. Your electric heating with app ensures that the house is comfortable again behamoment your alarm goes off, without you unnecessarily consuming electricity all night at the current rate of €0.259 per kWh.

Technology as a savings tool: Wi-Fi and app control

Digital connectivity is no longer a luxury, but a necessary tool for effective cost management. While traditional heating systems often operate with a central thermostat that controls the entire house, an electric heater with an app you the ability to manage every room down to the minute. Wi-Fi convectors act as smart nodes in your home that constantly communicate with your smartphone. This gives you the power to intervene immediately when your daily schedule changes, making unnecessary power consumption a thing of the past.

Remote control is one of the most appreciated features in a modern household. We have all left home at some point with the nagging doubt about whether the heater in the bathroom or study is still on. With your smartphone in hand, you can check the status of any convector in an instant. You switch off devices with a simple tap on the screen, no matter where you are. This direct control provides peace of mind and prevents you from paying for heat that no one is using.

Programmable thermostats and weekly schedules

The true power of the BEHA SmartHeater app lies in automating your comfort. Instead of manually operating buttons, you set a detailed weekly schedule that seamlessly aligns with your work week. For example, you program the convector so that the temperature only rises just before you get up and drops immediately as soon as you leave the house. For periods of extended absence, vacation mode is essential. This setting keeps the room frost-free with minimal consumption, while you step straight into a behahome upon your return by reactivating the heaters an hour before arrival.

Monitoring consumption for informed choices

To measure is to know in the fight against high energy costs. By monitoring your consumption in real-time via the app, you gain insight into which rooms require the most energy. You see exactly how many kilowatt-hours each unit consumes and what the associated costs are. This transparency is crucial for making informed choices about sustainable electric heating within your specific living situation.

Insight into your consumption data often leads to a direct change in behavior. Research shows that households that actively monitor their energy data waste up to 15% less energy by fine-tuning their settings. You immediately see the effect of a degree lower or a shorter heating time. This data-driven approach makes your electric heating with an app an investment that pays for itself faster. It enables you to make decisions based on facts rather than assumptions, which in 2026 will be the only way to maintain control over your energy bill.

Choosing the right electric heater for maximum savings

Saving on heating costs starts at the source: the hardware you bring into your home. An aesthetically pleasing design is nice, but the technical specifications ultimately determine whether your investment pays for itself. In 2026, everything revolves around precision. High-quality electric heating with an app systems operate BEHA with an accuracy of +/- 0.2 degrees. This prevents the room temperature from overshooting unnecessarily, which directly prevents unnecessarily high power consumption.

When choosing between a convector with a steel front or a glass front, the desired heat distribution plays the primary role. Steel fronts heat up very quickly and release their heat directly into the airflow, which is ideal for rooms you want to make comfortable quickly. Glass fronts have a higher heat capacity; they retain heat slightly longer and radiate it gradually. Both variants can be fully integrated into your smart home system, ensuring you always maintain control over your consumption.

What does the Ecodesign standard mean for your wallet?

Since the introduction of strict European requirements, the Ecodesign standard has been the standard for energy efficiency. These regulations require manufacturers to incorporate features that prevent energy waste, such as a weekly timer and open-window detection. When you choose a BEHA convector, you can be sure that the device meets these highest standards. This is not an unnecessary luxury; a heater that meets these standards consumes significantly less power than older models without this smart logic. Read more about this in our article on the Ecodesign electric heater: everything about the standards in 2026.

The importance of the correct wattage calculation

A common mistake is choosing a heater with too low a wattage for the room in question. Although this may seem cheaper to purchase, it actually drives up heating costs. An undersized heater must constantly operate at full power to reach the desired temperature, without ever succeeding. As a result, the relay remains continuously switched on. A rule of thumb for average insulated homes in the Netherlands is 30 to 40 watts per cubic meter. For an accurate calculation of the electric convector's consumption per room, it is advisable to include the insulation value and window area in your planning.

By selecting the right capacity, the thermostat can switch efficiently. The convector quickly brings the room up to temperature and then only needs to consume energy in short bursts to retain that heat. This is where an electric heater with an app proves its value; you can see immediately in the statistics whether a heater is working too hard for the room. For a detailed overview, check out our Electric heater with steel front: the complete buying guide for 2026.

Are you ready to heat your home smarter and more efficiently? Discover our full range of smart convectors and choose the solution that perfectly suits your living space.

Why Norwegian BEHA quality is the smartest choice

Norway is known worldwide for its relentless winters. In this challenging climate, BEHA built up over 100 years of experience in developing heating solutions that simply cannot fail. Today, this rich history translates into unprecedented efficiency in your own home. An electric heater with an app from BEHA is therefore much more than a modern device; it is the result of decades of innovation aimed at maximum heat output with the lowest possible consumption. In a time when energy costs are a central concern, this Norwegian reliability offers the peace of mind and security that many Dutch households are looking for.

Sustainability and maintenance-free use

Investing in quality is a long-term choice that always pays for itself. BEHAheaters distinguish themselves through their robust construction without moving parts. This not only means completely silent operation, which is essential in bedrooms or study rooms, but it also guarantees that the devices last for decades without losing effectiveness. Because no mechanical wear occurs, the system remains completely maintenance-free. You do not need to replace filters or lubricate motors. This contributes directly to a lower ecological footprint; after all, you do not have to purchase a new device every few years, which saves valuable resources and reduces the amount of waste. The absence of repair costs makes the total cost of ownership over the entire lifespan very attractive.

Aesthetics meets efficiency: steel and glass fronts

Efficiency does not have to come at the expense of your interior. The Scandinavian design philosophy states that functionality and aesthetics must go hand in hand. For those who want complete freedom in their interior design, a paintable radiator the ideal solution. You can paint the front of the convector the exact same color as your wall, making the heater virtually invisible in your living space. This ensures a seamless interior without compromising on your heating comfort.

For a more modern look, the glass fronts in deep black or classic white offer a luxurious accent that fits into any contemporary home. Whether you choose the clean lines of steel or the reflective depth of glass, you bring home a piece of Norwegian craftsmanship that does not age. The technological superiority is hidden behind a minimalist front, ensuring your home maintains a calm and uncluttered appearance. The combination of this timeless design with advanced smart home technology makes app-controlled electric heating the most responsible choice for those who take comfort, design, and cost control seriously. It is the ultimate synergy between smart technology and a responsible way of life.

Switch to smart and sustainable heating today

The energy market of 2026 demands a proactive approach in which you fully regain control over your heating costs. By phasing out outdated systems and consistently opting for zonal heating, you create a home that consumes energy only where and when it is truly needed. The technological precision of an app-controlled electric heater ensures that you never again pay unnecessarily for heat in unused rooms. In doing so, you are building a future-proof household that is ready for the further transition to a gas-free society.

Choosing BEHA means choosing more than 100 years of Norwegian expertise and equipment that meets the strictest Ecodesign standards as standard. Thanks to simple operation via the BEHA SmartHeater app, you manage your indoor climate with a precision that was previously unthinkable. 's energy-efficient collection BEHA and start saving on your monthly energy bills today. Turn your home into a beacon of comfort, tranquility, and technological efficiency.

Frequently asked questions about saving with electric heating

Is electric heating really cheaper than gas in 2026?

Yes, electric heating will be a financially sound choice in 2026 if you deploy the system smartly and locally. With an average gas price of €1.398 per m³ and an energy tax of over €0.72 per m³, the costs of gas consumption are rising faster than those of electricity. By heating only the rooms you are in, you avoid the high costs of a central boiler that keeps the entire house unnecessarily warm.

How much can I save by switching to a smart convector?

You can save hundreds of euros annually by switching to an electric heater with an app. The savings come primarily from eliminating unnecessary consumption through smart weekly schedules and open-window detection. Users who actively monitor their consumption via the app often report a 15% reduction in energy waste because they continuously optimize their settings based on actual data.

What is the most economical temperature to set my electric heater to?

The most energy-efficient comfort temperature is between 19 and 21 degrees Celsius, depending on your activity in the room. For the night or when you are away, lowering the temperature to 15 or 16 degrees is optimal to prevent the home from cooling down too much. A drop too low below 15 degrees can cause the walls to become too cold, which in turn makes heating up more energy-consuming.

Do I need a separate Wi-Fi heater for every room to save money?

Yes, for optimal zonal heating results, a separate convector is necessary in every frequently used room. Only in this way can you control each room independently and prevent the heating in the bedroom from running unnecessarily while you are in the living room. This individual management forms the core of an efficient electric heating plan where not a single kilowatt-hour is wasted.

How does the Ecodesign standard help me save on heating costs?

The Ecodesign standard guarantees that your appliance is equipped with smart features that automatically limit power consumption. Examples include precise temperature control and sensors that switch off the heater if a window is open. This European directive forces manufacturers to bring only the most efficient technologies to the market, which you will immediately notice in a lower energy bill compared to older, non-certified models.

Can I combine my electric heater with solar panels for extra savings?

Absolutely, the combination with solar panels is especially valuable in 2026 because this is the last full year of the net metering scheme. By using your self-generated electricity directly for heating, you increase your self-consumption and reduce your dependence on the power grid. An app-controlled system enables you to turn on the heating precisely at the times when your panels are producing the most energy.

What is the advantage of a Norwegian electric heater compared to cheap alternatives?

The biggest advantage of a Norwegian electric heater with an app is the superior thermostat precision of +/- 0.2 degrees Celsius. Cheap alternatives often deviate by 2 to 3 degrees, causing them to switch on and off unnecessarily much more frequently. Additionally, the Norwegian build quality ensures a lifespan of decades and safer use due to the absence of glowing elements that burn dust.

How many watts do I need to electrically heat an average living room?

For an average insulated living room in the Netherlands, you need approximately 30 to 40 watts per cubic meter. For a living room of 30 square meters with a ceiling height of 2.5 meters, this amounts to a total required power of approximately 2,250 to 3,000 watts. It is smart to distribute this across two convectors for even heat distribution and a faster warm-up time without overloading a single point. Read more about how to electric convector consumption and debunk myths for an optimal choice in 2026.